Creating and Using Snapshots

Node operators are most likely familiar with creating snapshots of their database and restoring their nodes using a snapshot to lower downtime. In ARK V1, Postgres' native SQL dump was used to create snapshots. ARK V2 has packages to optimize snapshots and increase the ease of use.


The core-snapshots package facilitates the process of creating, verifying, and applying blockchain backups. This suite of packages can be used to create regular database backups in a serialization format understood by all ARK Core nodes.

To ensure that snapshots are usable across the network, it is often helpful to establish a common standard of data serialization. If all nodes agree on a single ruleset governing how blockchain data maps into a database representation, it becomes much easier to compare, validate, and verify snapshots created by different nodes. core-snapshots offers three such standards, also known as codecs, covering a wide range of use cases:

  • The lite codec utilizes a MessagePack encoding format with ARK-specific key-value pairs. This encoding format is faster than the ark format, but results in larger backup file sizes, as keys are stored alongside their respective values
  • The ark codec uses ARK's serialize and deserialize standards in creating the backup. As the ARK serialization protocol does not include key data, this codec results in smaller database backup sizes. However, this density comes at the expense of performance, as ARK serialization (currently) cannot match MessagePack's encoding and decoding speed.
  • The msgpack codec uses MessagePack without any ARK-specific standards. As this codec has no specific knowledge of ARK serialization, this option is both the fastest and the most inefficient regarding snapshot file size.

With all options, the tradeoff to keep in mind is performance vs. filesystem impact. If you have an external storage solution for backups and limited computational resources, using msgpack will ensure maximum performance across all potential use cases. Alternatively, if your node setup is robust and backup creation speed is not a relevant factor, the ark codec might be the right choice.

If you're unsure of which to choose, use the lite codec. Generally speaking, it offers the best tradeoff between performance and impact.


The @arkecosystem/core is a command-line interface designed to help node operators and developers automate their backup creation workflow. While the commands themselves can be found with ark snapshot --help, the source code behind these commands can be found in the packages/core/src/commands/snapshot file.

Create a Snapshot

Calling the dump CLI command prompts your node to create a backup and save it in the data directory specified at runtime. The folder name will follow the format {data}/snapshots/{network}/{startblock}-{endblock} and contains transactions.lite, blocks.lite and meta.json.

Creating a New Snapshot

To create a snapshot, run the following command:

ark snapshot:dump

The command will generate snapshot files in your configured folder. By default, this folder will be in ~/.local/share/ark-core/NETWORK_NAME/snapshots. Files names follow the pattern: {TABLE}.{CODEC} For example, running yarn dump:devnet will create the following files in the folder ~/.local/share/ark-core/devnet/snapshots/0-331985/:

  • blocks.lite
  • transactions.lite

The codec used can be specified using the —codec flag, for example:

ark snapshot:dump --codec ark

The folder 0-331985 indicates that the snapshot includes data between block 0 and block 331985.

Using the optional —start and —end flags will specify a lower and uppers bounds for the snapshot, allowing you to customize your backups to your specific needs.

Click here to see the flags that can be added to the ark snapshot:dump command at runtime or type ark snapshot:dump --help.

Append Data to an Existing Snapshot

Appending data to existing snapshots can help manage snapshot size and improve snapshot import speeds. The command is the same as creating a snapshot with an additional parameter for --blocks. This flag allows you to specify the existing snapshot blocks/folder you want to append to.

To use the --blocks flag, provide the 0-331985 blocks number or folder name as an argument:

ark snapshot:dump --blocks 0-331985

Note that all appends create new backup folders and leave the original snapshot intact. To preserve hard disk space, remove old backups if you are sure your appended snapshot is valid.

Restoring a Snapshot

The restore command allows you to restore your ARK Core node with data from a backup you previously created.

Restoring new snapshots should not be done while your node is still running, as running a blockchain node without blockchain data can lead to unexpected behavior.

Snapshot filename must be specified:

ark snapshot:restore --blocks 0-331985

If you want to restore from block 1, e.g., empty database first, you should run the yarn truncate:NETWORK_NAME command.

ark snapshot:truncate

Alternatively, add the —truncate flag to the restore command to truncate and restore with one command:

ark snapshot:restore --blocks 0-331985 --truncate

By default, the block height is set to last finished round (blocks are deleted at the end). If you have more snapshots files following each other, then you can disable this behavior with the --skip-revert-round flag. If this flag is present, block height will not be reverted at the end of restore to last completed round.

If you want to do additional crypto.verify check for each block and transaction a flag --signatureVerify can be added to the restore command

ark snapshot:restore --blocks 0-331985 --truncate --signatureVerify

Please note that this will increase the restore time drastically.

Click here to see the flags that can be added to the ark snapshot:restore command at runtime or type ark snapshot:restore --help.

Verify Existing Snapshot

Verifying a snapshot with the verify command involves running checks on a snapshot to ensure all signatures are cryptographically valid and that block hashes follow each other in a logical progression to create a valid blockchain.

Please note that the verify command does not interact with the database in any way. It is therefore safe, and a good idea, to verify all snapshots before importing them into your ARK Core node.

ark snapshot:verify --blocks 0-331985

You can also verify the chaining process and skip signature verification with --skip-sign-verify option.

ark snapshot:verify --blocks 0-331985 --skip-sign-verify

Note that database verification is run by default whenever a node boots up. Although this procedure ensures network consistency, importing an invalid snapshot will increase the amount of time it takes your node to sync with the network. Trust, but verify — even with your snapshots.

Click here to see the flags that can be added to the ark snapshot:verify command at runtime or type ark snapshot:verify --help.

Performing a Rollback

The rollback command can be used to roll your blockchain database back to a specific height. This can be useful to manually alter your blockchain structure in case the rollback features included in ARK Core are not accurate enough for your use case.

The following command will rollback the chain to block height of 350000:

ark snapshot:rollback --height 350000

If the --height argument is not set, the command will rollback the chain to the last completed round.

Rollback command also makes a backup of forged transactions, ensuring that no local history is accidentally deleted in a rollback. Transactions are stored next to the snapshot files (in ~/.local/share/ark-core/NETWORK_NAME/snapshots/). The file is named rollbackTransactionBackup.startBlockHeight.endBlockHeight.json.

For example: rollbackTransactionBackup.53001.54978.json contains transactions from block 53001 to block 54978.

Click here to see the flags that can be added to the ark snapshot:rollback command at runtime or type ark snapshot:rollback --help.


Behind the scenes, core-snapshots uses NodeJS streams to process export and import commands. The export and import pipelines are modified based on various runtime options, such as whether the output should be gzipped or not. Here is a condensed version of the business logic behind the export command:

exportTable: async (table, options) => {
    const snapFileName = utils.getPath(
    const codec = codecs.get(options.codec)
    const gzip = zlib.createGzip()
    await fs.ensureFile(snapFileName)

    try {
      const snapshotWriteStream = fs.createWriteStream(
        options.blocks ? { flags: 'a' } : {},
      const encodeStream = msgpack.createEncodeStream(
        codec ? { codec: codec[table] } : {},
      const qs = new QueryStream(options.queries[table])

      const data = await, s => {
        if (options.meta.skipCompression) {
          return s.pipe(encodeStream).pipe(snapshotWriteStream)

        return s
        `Snapshot: ${table} done. ==> Total rows processed: ${
        }, duration: ${data.duration} ms`,

      return {
        count: utils.calcRecordCount(table, data.processed, options.blocks),
        startHeight: utils.calcStartHeight(
        endHeight: options.meta.endHeight,
    } catch (error) {
      app.forceExit('Error while exporting data via query stream', error)

You can find more information about streams and pipes in the NodeJS documentation.

Default Parameters

  codec: 'lite',
  chunkSize: 50000,